Solving “Windows cannot install required files. The file may be corrupt or missing. Error code: 0x80070570.”
This error usually appears suddenly,
Actually, there are some reasons for the error. The most common are:
Random-access memory (RAM) failure
RAM failure quite often causes error 0x80070570. Microsoft offers free utility for RAM check. Starting with Windows Vista the RAM check utility is built-in. For earlier Windows versions, you can download and use. RAM check utilities are quite simple and don’t require any actions on your side.
If you have several memory slots on your PC, you need to check each one separately.
If the RAM test detects errors, the simplest thing you can do is to wipe the straps with a dry cloth or try to use different slots. Run memory test with different configurations and check the result. If it does not help, unfortunately, you should admit that you have to buy a new RAM.
Windows installation file error
Usually you can easily figure out that the 0x80070570 error is caused by damaged Windows files.
Often, you start to get the error immediately after reinstalling or updating an operating system. If you reinstall the OS, your solution is to write the boot file once again. If you start to get the error immediately after OS is updated, you need to copy important files stored on the device to a safe location if the system allows to do this, or recover data using special data recovery software (the detailed tutorial on how to do this is given below). Only after you make sure that all valuable data is intact and safe, you can reinstall the operating system.
Hard drive damage or file system error
There are a lot of utilities to check the health of a hard drive. These tools can read and analyze so-called S.M.A.R.T. parameters. The list of the parameters is quite long but the most important among them are: Read Error Rate, Reallocated Sectors Count, Seek Error Rate, Seek Time Performance, Soft Read Error Rate. If the diagnostic software informs you that the disk produces error, most likely it is a root case of the 0x80070570 error.
If you cannot launch the diagnostic tool because Windows does not start on the PC, you need to remove the disk from a PC box, connect it to another PC, and then check its state.
If the 0x80070570 error is caused by a hard drive failure or a file system failure you have to either replace or format the device. If the data stored on the disk is important, before replacing or formatting it use data recovery software like ReclaiMe File Recovery to extract files and folders.
Bad CD Rom is capable of causing the error,to continue with your installation look for a bootable usb flash drive and use it to install the windows and it will install successfully.
Did this solve your problem,drop your comment below.