NETWORK INTERFACE CARD FUNCTIONS AND BENEFITS
A network interface card (NIC) is a hardware component without which a computer cannot be connected over a network. It is a circuit board installed in a computer that provides a dedicated network connection to the computer. It is also called network interface controller, network adapter or LAN adapter.
A network interface controller is a computer hardware component that connects a computer to a computer network. Early network interface controllers were commonly implemented on expansion cards that plugged into a computer bus
Types of Network Interface Cards
There are two types NIC they are,
- Ethernet NIC
- Wireless NIC
Ethernet NIC card is a slot for a cable where we have to plug one end of the ethernet cable into the slots of the computer and another end of the cable is plugged into the modem, likewise, various devices are connected to make a communication set up between them. There are three standards in Ethernet they are
- 5-Base T: It was developed in 1973, which can transmit, paragraphs using coaxial cable up to a distance 1000mts.
- 10-Base T: It was developed in 1987, it uses twisted cables like telephonic cables for communication.
- 100-Base T: It is also known as fast ethernet, the speed of data transmitted is very high.
- Gigabit Ethernet: It is also named as 1000-Base T ethernet, the special feature of this is it increases the network bandwidth up to 10 times, which can transmit up to 1000mbps of data.
Wireless Network NIC
Wireless network NIC cards consist of a small antenna integrated onto the card, where the communication between various devices is set up wirelessly using the router and various network protocols. One such example of a wireless network NIC card is fiber data digital interface FDDI. In a case where data has to be transmitted over long distances, in such cases, a fiber data digital interface FDDI concept is used which translates data into digital pulses and communicates using optical fiber. FDDI is ring-type architecture, which is of 100mbps, transmission, and retransmission for a long distance is an advantage of FDDI.
COMPONENTS OF NETWORK INTERFACE CARD
- Memory- It is present externally so that it can store the data temporarily during the communication.
- Connectors- To connect the cables to the Ethernet port.
- Processor- To convert the data in a suitable form of communication.
- Jumpers- Jumpers or the DIP switches are present. so that the operation can be controlled by using it.
- Routers- To provide wireless connectivity routers are used.
Functions of NIC
The functions performed by the Network Interface Card are
Wired Network Connectivity
For the wired networks, a port is essential to connect the ethernet cable. It has a direct connection with the hub or switches present at the center. The resources or the data shard is based on their MAC address accessing. The wired network ensures the presence of physical cable for communication of the devices.
Wireless Network Connectivity
A wireless network connection doesn’t require any physical connection. Other than cables the network access is done through the antenna provided. The radio waves are the mean of communication between the device and the central switch that is wireless.
Based on the components chosen during the connection establishment the performance depends on such pieces of equipment. Both wired and wireless connectivity are the functions performed by the NIC.
Advantages Of Network interface card
- The communication speed using the Internet is high usually in Gigabytes.
- Highly reliable connection.
- Many peripheral devices can be connected using many ports of NIC cards.
- Bulk data can be shared among many users.
Drop your comment