Checkpoint Firewall Administration Guide

checkpoin2

Firewall defined

A firewall is a network security device that monitors incoming and outgoing network traffic and permits or blocks data packets based on a set of security rules. Its purpose is to establish a barrier between your internal network and incoming traffic from external sources (such as the internet) in order to block malicious traffic like viruses and hackers.

In computing, a firewall is a network security system that monitors and controls incoming and outgoing network traffic based on predetermined security rules. A firewall typically establishes a barrier between a trusted network and an untrusted network, such as the Internet.

How does a firewall work?

Firewalls carefully analyze incoming traffic based on pre-established rules and filter traffic coming from unsecured or suspicious sources to prevent attacks. Firewalls guard traffic at a computer’s entry point, called ports, which is where information is exchanged with external devices. For example, “Source address 172.18.1.1 is allowed to reach destination 172.18.2.1 over port 22.”

Think of IP addresses as houses, and port numbers as rooms within the house. Only trusted people (source addresses) are allowed to enter the house (destination address) at all—then it’s further filtered so that people within the house are only allowed to access certain rooms (destination ports), depending on if they’re the owner, a child, or a guest. The owner is allowed to any room (any port), while children and guests are allowed into a certain set of rooms (specific ports).

Types of firewalls

Firewalls can either be software or hardware, though it’s best to have both. A software firewall is a program installed on each computer and regulates traffic through port numbers and applications, while a physical firewall is a piece of equipment installed between your network and gateway.

Packet-filtering firewalls, the most common type of firewall, examine packets and prohibit them from passing through if they don’t match an established security rule set. This type of firewall checks the packet’s source and destination IP addresses. If packets match those of an “allowed” rule on the firewall, then it is trusted to enter the network.

Packet-filtering firewalls are divided into two categories: stateful and stateless. Stateless firewalls examine packets independently of one another and lack context, making them easy targets for hackers. In contrast, stateful firewalls remember information about previously passed packets and are considered much more secure.

While packet-filtering firewalls can be effective, they ultimately provide very basic protection and can be very limited—for example, they can’t determine if the contents of the request that’s being sent will adversely affect the application it’s reaching. If a malicious request that was allowed from a trusted source address would result in, say, the deletion of a database, the firewall would have no way of knowing that. Next-generation firewalls and proxy firewalls are more equipped to detect such threats.

Next-generation firewalls (NGFW) combine traditional firewall technology with additional functionality, such as encrypted traffic inspection, intrusion prevention systems, anti-virus, and more. Most notably, it includes deep packet inspection (DPI). While basic firewalls only look at packet headers, deep packet inspection examines the data within the packet itself, enabling users to more effectively identify, categorize, or stop packets with malicious data. 

Proxy firewalls filter network traffic at the application level. Unlike basic firewalls, the proxy acts an intermediary between two end systems. The client must send a request to the firewall, where it is then evaluated against a set of security rules and then permitted or blocked. Most notably, proxy firewalls monitor traffic for layer 7 protocols such as HTTP and FTP, and use both stateful and deep packet inspection to detect malicious traffic.

Network address translation (NAT) firewalls allow multiple devices with independent network addresses to connect to the internet using a single IP address, keeping individual IP addresses hidden. As a result, attackers scanning a network for IP addresses can’t capture specific details, providing greater security against attacks. NAT firewalls are similar to proxy firewalls in that they act as an intermediary between a group of computers and outside traffic.

Stateful multilayer inspection (SMLI) firewalls filter packets at the network, transport, and application layers, comparing them against known trusted packets. Like NGFW firewalls, SMLI also examine the entire packet and only allow them to pass if they pass each layer individually. These firewalls examine packets to determine the state of the communication (thus the name) to ensure all initiated communication is only taking place with trusted sources.

WHAT IS FIREWALL ADMINISTRATION?

 Firewall Administration is ensuring the proper management, configuration, and change management of the firewall. It comprises of controlling access to the platform, platform operating system builds, log reviews, time synchronization and backups.

What does a firewall administrator do?

Firewall administrators are responsible for: … Troubleshooting their own firewall policies before contacting OIT. Ensuring that the device they use to manage their firewall policies is configured with an IP from the primary subnet, if they are obtaining an IP from a Vlan that contains multiple subnet ranges.

WHAT IS CHECKPOINT FIREWALL ADMINISTRATION?

Check Point offers effective Security Management solutions to help you keep up with constantly
growing needs and challenges of your organizational network. This Administration Guide focuses
on the basic Security Management Server deployment.
If you are interested in deployments for organizations with multiple sites, refer to the R80
Multi-Domain Server Administration Guide
These are the basic components of Check Point security architecture

These are the basic components of Check Point security architecture.
Item Description
1 Your environment to protect.
2 Security Management Server – Manages Security Gateways with defined security policies
and monitors security events on the network.
3 SmartConsole – Check Point Graphical User Interface for connection to and management
of Security Management Servers.
4 Security Gateway – Placed at the perimeter of the network topology, to protect your
environment through enforcement of the security policies.Check Point Security Management Administration Guide R80

For complete checkpoint firewall administration implementation guide,please download the pdf file below.

Drop your comment

Hits: 6

Related Post

Leave a Reply

Your email address will not be published.