Definition of windows 10
Windows 10 is a series of operating systems developed by Microsoft and released as part of its Windows NT family of operating systems. It is the successor to Windows 8.1, released nearly two years earlier, and was released to manufacturing on July 15, 2015, and broadly released for the general public on July 29, 2015.
Bootable USB Drive A bootable USB is one that contains instructions for your computer’s bootloader to load up various assets to run an operating system.
Normally, bootable USBs are used for operating system installers, so your system will know to boot into the installer, and the installer will essentially unpack a large compressed file containing the actual operating system’s resources. If you install any operating system onto another USB drive, then it will also be considered a bootable USB, but for an entire operating system this time.
Booting Windows 10 Through a USB flash drive is simple. Within minutes you can have a fresh new version of Windows installed on your PC, laptop, or desktop
Why Is It necessary To Boot a Windows Installation From USB?
If your spare PC doesn’t have a CD rom drive, or you’re out of DVDs, a bootable USB stick is the best solution.
After all, a USB stick is portable, and you can guarantee it is compatible with every desktop and laptop computer. While some computers might be missing a DVD drive, they all have a USB port.
It’s also quicker to install from USB. A USB drive can be made bootable faster than an CD Rom drive can; it also installs the operating system quicker.
To install Windows 7 or Windows 10 from a USB stick, you need a device with at least 30G of storage.
Making Sure Your USB Stick Has UEFI Boot Support
Before you download a bootable Windows installation image, it’s important to know the difference between UEFI and BIOS.
Old PCs rely on the basic input/output system (BIOS) to boot the operating system and manage data between the operating system and devices. For the past decade, UEFI (Unified Extensible Firmware Interface) has replaced BIOS, adding legacy support. UEFI can assist with PC diagnosis and repair without additional software or media.
Fortunately, the most common methods of installing Windows 10 from a bootable USB drive support UEFI and legacy BIOS hardware. So, whichever option you choose should work for your hardware.
Getting Ready The Windows 10 Bootable USB
Before you continue, insert your formatted USB flash stick in your PC or laptop.
Ready to install Windows 10? While several methods exist, the easiest way to do this is to use the Windows 10 Media Creation Tool. Or you download power iso software
Save the tool to your computer. It’s around 20MB in size, so shouldn’t take too long on a fast connection. Once downloaded, launch the media creation tool and click Accept when prompted.
You’ll be presented with two options. Select Create installation media (USB flash drive, DVD, or ISO file) for another PC and click Next.
Set your preferred Language, Windows 10 Edition, and system Architecture. Note that if these settings cannot be changed, you should clear the checkbox labeled Use the recommended options for this PC. Hit Next again.
Choose USB flash drive, then Next, and select the USB drive from the list. Click Next once more to prompt the downloading of your Windows 10 installation files.
Wait while the bootable USB Windows 10 installer is created. How long this takes will depend on your internet speed. Several gigabytes of data will be installed, so if you don’t have access to a fast internet connection at home, consider a library or even your place of work.
Installing Windows 10 With a Bootable USB Drive
With the installation media created, you’ll be able to install Windows 10. The USB drive is now bootable, so all you need to do is safely remove it from your PC, then insert it into the target device.
Power up the computer you’re installing Windows 10 on and wait for it to detect the USB drive. If this doesn’t happen, reboot, this time pressing the key to access the UEFI/BIOS or boot menu. Ensure the USB device is detected, then select it as the main boot device.
The subsequent reboot should detect the Windows 10 installation media. You’re now ready to install Windows 10! Get started by starting the installation wizard.
Once you’ve worked through the wizard, Windows 10 will be installed. Note that some installation may continue after you log in, so be patient. It’s also worth checking for Windows Updates (Settings > Updates & Security > Windows Update) after installation to ensure everything is up to date.
That’s all that is required.
Hope you enjoyed this write up?
