COMPUTER ERROR CODES AND THEIR MEANINGS.

The following are computer error codes and their meanings

http
Windows System Error Code List
CodeDescription
Error Code 1Incorrect function. [ERROR_INVALID_FUNCTION (0x1)]
Error Code 2The system cannot find the file specified. [ERROR_FILE_NOT_FOUND (0x2)]
Error Code 3The system cannot find the path specified. [ERROR_PATH_NOT_FOUND (0x3)]
Error Code 4The system cannot open the file. [ERROR_TOO_MANY_OPEN_FILES (0x4)]
Error Code 5Access is denied. [ERROR_ACCESS_DENIED (0x5)]
Error Code 6The handle is invalid. [ERROR_INVALID_HANDLE (0x6)]
Error Code 7The storage control blocks were destroyed. [ERROR_ARENA_TRASHED (0x7)]
Error Code 8Not enough storage is available to process this command. [ERROR_NOT_ENOUGH_MEMORY (0x8)]
Error Code 9The storage control block address is invalid. [ERROR_INVALID_BLOCK (0x9)]
Error Code 10The environment is incorrect. [ERROR_BAD_ENVIRONMENT (0xA)]
Error Code 11An attempt was made to load a program with an incorrect format. [ERROR_BAD_FORMAT (0xB)]
Error Code 12The access code is invalid. [ERROR_INVALID_ACCESS (0xC)]
Error Code 13The
data is invalid. [ERROR_INVALID_DATA (0xD)]
Error Code 14Not enough storage is available to complete this operation. [ERROR_OUTOFMEMORY (0xE)]
Error Code 15The system cannot find drive specified. [ERROR_INVALID_DRIVE (0xF)]
Error Code 16The directory cannot be removed. [ERROR_CURRENT_DIRECTORY (0x10)]
Error Code 17The system cannot move the file to a different disk drive. [ERROR_NOT_SAME_DEVICE (0x11)]
Error Code 18There are no more files [ERROR_NO_MORE_FILES (0x12)]
Error Code 19The media is write protected. [ERROR_WRITE_PROTECT (0x13)]
Error Code 20The system cannot find the device specified. [ERROR_BAD_UNIT (0x14)]
Error Code 21The device is not ready. [ERROR_NOT_READY (0x15)]
Error Code 22The device does not recognize the command. [ERROR_BAD_COMMAND (0x16)]
Error Code 23Data error (cyclic redundancy check). [ERROR_CRC (0x17)]
Error Code 24The program issued a command but the command length is incorrect. [ERROR_BAD_LENGTH (0x18)]
Error Code 25The drive cannot locate a specific area or track on the disk. [ERROR_SEEK (0x19)]
Error Code 26The specified disk or diskette cannot be accessed. [ERROR_NOT_DOS_DISK (0x1A)]
Error Code 27The drive cannot find the sector requested. [ERROR_SECTOR_NOT_FOUND (0x1B)]
Error Code 28The printer is out of paper. [ERROR_OUT_OF_PAPER (0x1C)]
Error Code 29The system cannot write to the specified device. [ERROR_WRITE_FAULT (0x1D)]
Error Code 30The system cannot read from the specified device. [ERROR_READ_FAULT (0x1E)]
Error Code 31A device attached to the system is not functioning. [ERROR_GEN_FAILURE (0x1F)]
Error Code 32The process cannot access the file because it is being used by another process. [ERROR_SHARING_VIOLATION (0x20)]
Error Code 33The process cannot access the file because another process has locked a portion of the file. [ERROR_LOCK_VIOLATION (0x21)]
Error Code 34The wrong diskette is in the drive. Insert %2 (Volume Serial Number
Error Code 36Too many files opened for sharing. [ERROR_SHARING_BUFFER_EXCEEDED (0x24)]
Error Code 38Reached the end of the file. [ERROR_HANDLE_EOF (0x26)]
Error Code 39The disk is full. [ERROR_HANDLE_DISK_FULL (0x27)]
Error Code 50The request is not supported. [ERROR_NOT_SUPPORTED (0x32)]
Error Code 51Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path contact your network administrator. [ERROR_REM_NOT_LIST (0x33)]
Error Code 52You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup choose another workgroup name. [ERROR_DUP_NAME (0x34)]
Error Code 53The network path was not found. [ERROR_BAD_NETPATH (0x35)]
Error Code 54The network is busy. [ERROR_NETWORK_BUSY (0x36)]
Error Code 55The specified network resource or device is no longer available. [ERROR_DEV_NOT_EXIST (0x37)]
Error Code 56The network BIOS command limit has been reached. [ERROR_TOO_MANY_CMDS (0x38)]
Error Code 57A network adapter hardware error occurred. [ERROR_ADAP_HDW_ERR (0x39)]
Error Code 58The specified server cannot perform the requested operation. [ERROR_BAD_NET_RESP (0x3A)]
Error Code 59An unexpected network error occurred. [ERROR_UNEXP_NET_ERR (0x3B)]
Error Code 60The remote adapter is not compatible. [ERROR_BAD_REM_ADAP (0x3C)]
Error Code 61The printer queue is full. [ERROR_PRINTQ_FULL (0x3D)]
Error Code 62Space to store the file waiting to be printed is not available on the server. [ERROR_NO_SPOOL_SPACE (0x3E)]
Error Code 63Your file waiting to be printed was deleted. [ERROR_PRINT_CANCELLED (0x3F)]
Error Code 64The specified network name is no longer available. [ERROR_NETNAME_DELETED (0x40)]
Error Code 65Network access is denied. [ERROR_NETWORK_ACCESS_DENIED (0x41)]
Error Code 66The network resource type is not correct. [ERROR_BAD_DEV_TYPE (0x42)]
Error Code 67The network name cannot be found. [ERROR_BAD_NET_NAME (0x43)]
Error Code 68The name limit for the local computer network adapter card was exceeded. [ERROR_TOO_MANY_NAMES (0x44)]
Error Code 69The network BIOS session limit was exceeded. [ERROR_TOO_MANY_SESS (0x45)]
Error Code 70The remote server has been paused or is in the process of being started. [ERROR_SHARING_PAUSED (0x46)]
Error Code 71No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. [ERROR_REQ_NOT_ACCEP (0x47)]
Error Code 72The specified printer or disk device has been paused. [ERROR_REDIR_PAUSED (0x48)]
Error Code 80The file exists. [ERROR_FILE_EXISTS (0x50)]
Error Code 82The directory or file cannot be created. [ERROR_CANNOT_MAKE (0x52)]
Error Code 83Fail on INT 24. [ERROR_FAIL_I24 (0x53)]
Error Code 84Storage to process this request is not available. [ERROR_OUT_OF_STRUCTURES (0x54)]
Error Code 85The local device name is already in use. [ERROR_ALREADY_ASSIGNED (0x55)]
Error Code 86The specified network password is not correct. [ERROR_INVALID_PASSWORD (0x56)]
Error Code 87The parameter is incorrect. [ERROR_INVALID_PARAMETER (0x57)]
Error Code 88A write fault occurred on the network. [ERROR_NET_WRITE_FAULT (0x58)]
Error Code 89The system cannot start another process at this time. [ERROR_NO_PROC_SLOTS (0x59)]
Error Code 100Cannot create another system semaphore. [ERROR_TOO_MANY_SEMAPHORES (0x64)]
Error Code 101The exclusive semaphore is owned by another process. [ERROR_EXCL_SEM_ALREADY_OWNED (0x65)]
Error Code 102The semaphore is set and cannot be closed. [ERROR_SEM_IS_SET (0x66)]
Error Code 103The semaphore cannot be set again. [ERROR_TOO_MANY_SEM_REQUESTS (0x67)]
Error Code 104Cannot request exclusive semaphores at interrupt time. [ERROR_INVALID_AT_INTERRUPT_TIME (0x68)]
Error Code 105The previous ownership of this semaphore has ended. [ERROR_SEM_OWNER_DIED (0x69)]
Error Code 106Insert the diskette for drive %1. [ERROR_SEM_USER_LIMIT (0x6A)]
Error Code 107The program stopped because an alternate diskette was not inserted. [ERROR_DISK_CHANGE (0x6B)]
Error Code 108The disk is in use or locked by another process. [ERROR_DRIVE_LOCKED (0x6C)]
Error Code 109The pipe has been ended. [ERROR_BROKEN_PIPE (0x6D)]
Error Code 110The system cannot open the device or file specified. [ERROR_OPEN_FAILED (0x6E)]
Error Code 111The file name is too long. [ERROR_BUFFER_OVERFLOW (0x6F)]
Error Code 112There is not enough space on the disk. [ERROR_DISK_FULL (0x70)]
Error Code 113No more internal file identifiers available. [ERROR_NO_MORE_SEARCH_HANDLES (0x71)]
Error Code 114The target internal file identifier is incorrect. [ERROR_INVALID_TARGET_HANDLE (0x72)]
Error Code 117The IOCTL call made by the application program is not correct. [ERROR_INVALID_CATEGORY (0x75)]
Error Code 118The verify-on-write switch parameter value is not correct. [ERROR_INVALID_VERIFY_SWITCH (0x76)]
Error Code 119The system does not support the command requested. [ERROR_BAD_DRIVER_LEVEL (0x77)]
Error Code 120This function is not supported on this system. [ERROR_CALL_NOT_IMPLEMENTED (0x78)]
Error Code 121The semaphore timeout period has expired. [ERROR_SEM_TIMEOUT (0x79)]
Error Code 122The data area passed to a system call is too small. [ERROR_INSUFFICIENT_BUFFER (0x7A)]
Error Code 123The filename, directory name or volume label syntax is incorrect. [ERROR_INVALID_NAME (0x7B)]
Error Code 124The system call level is not correct. [ERROR_INVALID_LEVEL (0x7C)]
Error Code 125The disk has no volume label. [ERROR_NO_VOLUME_LABEL (0x7D)]
Error Code 126The specified module could not be found. [ERROR_MOD_NOT_FOUND (0x7E)]
Error Code 127The specified procedure could not be found. [ERROR_PROC_NOT_FOUND (0x7F)]
Error Code 128There are no child processes to wait for. [ERROR_WAIT_NO_CHILDREN (0x80)]
Error Code 129The %1 application cannot be run in Win32 mode. [ERROR_CHILD_NOT_COMPLETE (0x81)]
Error Code 130Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. [ERROR_DIRECT_ACCESS_HANDLE (0x82)]
Error Code 131An attempt was made to move the file pointer before the beginning of the file. [ERROR_NEGATIVE_SEEK (0x83)]
Error Code 132The file pointer cannot be set on the specified device or file. [ERROR_SEEK_ON_DEVICE (0x84)]
Error Code 133A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. [ERROR_IS_JOIN_TARGET (0x85)]
Error Code 134An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. [ERROR_IS_JOINED (0x86)]
Error Code 135An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. [ERROR_IS_SUBSTED (0x87)]
Error Code 136The system tried to delete the JOIN of a drive that is not joined. [ERROR_NOT_JOINED (0x88)]
Error Code 137The system tried to delete the substitution of a drive that is not substituted. [ERROR_NOT_SUBSTED (0x89)]
Error Code 138The system tried to join a drive to a directory on a joined drive. [ERROR_JOIN_TO_JOIN (0x8A)]
Error Code 139The system tried to substitute a drive to a directory on a substituted drive. [ERROR_SUBST_TO_SUBST (0x8B)]
Error Code 140The system tried to join a drive to a directory on a substituted drive. [ERROR_JOIN_TO_SUBST (0x8C)]
Error Code 141The system tried to SUBST a drive to a directory on a joined drive. [ERROR_SUBST_TO_JOIN (0x8D)]
Error Code 142The system cannot perform a JOIN or SUBST at this time. [ERROR_BUSY_DRIVE (0x8E)]
Error Code 143The system cannot join or substitute a drive to or for a directory on the same drive. [ERROR_SAME_DRIVE (0x8F)]
Error Code 144The directory is not a subdirectory of the root directory. [ERROR_DIR_NOT_ROOT (0x90)]
Error Code 145The directory is not empty. [ERROR_DIR_NOT_EMPTY (0x91)]
Error Code 146The path specified is being used in a substitute. [ERROR_IS_SUBST_PATH (0x92)]
Error Code 147Not enough resources are available to process this command. [ERROR_IS_JOIN_PATH (0x93)]
Error Code 148The path specified cannot be used at this time. [ERROR_PATH_BUSY (0x94)]
Error Code 149An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. [ERROR_IS_SUBST_TARGET (0x95)]
Error Code 150System trace information was not specified in your CONFIG.SYS file or tracing is disallowed. [ERROR_SYSTEM_TRACE (0x96)]
Error Code 151The number of specified semaphore events for DosMuxSemWait is not correct. [ERROR_INVALID_EVENT_COUNT (0x97)]
Error Code 152DosMuxSemWait did not execute too many semaphores are already set. [ERROR_TOO_MANY_MUXWAITERS (0x98)]
Error Code 153The DosMuxSemWait list is not correct. [ERROR_INVALID_LIST_FORMAT (0x99)]
Error Code 154The volume label you entered exceeds the label character limit of the target file system. [ERROR_LABEL_TOO_LONG (0x9A)]
Error Code 155Cannot create another thread. [ERROR_TOO_MANY_TCBS (0x9B)]
Error Code 156The recipient process has refused the signal. [ERROR_SIGNAL_REFUSED (0x9C)]
Error Code 157The segment is already discarded and cannot be locked. [ERROR_DISCARDED (0x9D)]
Error Code 158The segment is already unlocked. [ERROR_NOT_LOCKED (0x9E)]
Error Code 159The address for the thread ID is not correct. [ERROR_BAD_THREADID_ADDR (0x9F)]
Error Code 160One or more arguments are not correct. [ERROR_BAD_ARGUMENTS (0xA0)]
Error Code 161The specified path is invalid. [ERROR_BAD_PATHNAME (0xA1)]
Error Code 162A signal is already pending. [ERROR_SIGNAL_PENDING (0xA2)]
Error Code 164No more threads can be created in the system. [ERROR_MAX_THRDS_REACHED (0xA4)]
Error Code 167Unable to lock a region of a file. [ERROR_LOCK_FAILED (0xA7)]
Error Code 170The requested resource is in use. [ERROR_BUSY (0xAA)]
Error Code 173A lock request was not outstanding for the supplied cancel region. [ERROR_CANCEL_VIOLATION (0xAD)]
Error Code 174The file system does not support atomic changes to the lock type. [ERROR_ATOMIC_LOCKS_NOT_SUPPORTED (0xAE)]
Error Code 180The system detected a segment number that was not correct. [ERROR_INVALID_SEGMENT_NUMBER (0xB4)]
Error Code 182The operating system cannot run %1. [ERROR_INVALID_ORDINAL (0xB6)]
Error Code 183Cannot create a file when that file already exists. [ERROR_ALREADY_EXISTS (0xB7)]
Error Code 186The flag passed is not correct. [ERROR_INVALID_FLAG_NUMBER (0xBA)]
Error Code 187The specified system semaphore name was not found. [ERROR_SEM_NOT_FOUND (0xBB)]
Error Code 188The operating system cannot run %1. [ERROR_INVALID_STARTING_CODESEG (0xBC)]
Error Code 189The operating system cannot run %1. [ERROR_INVALID_STACKSEG (0xBD)]
Error Code 190The operating system cannot run %1. [ERROR_INVALID_MODULETYPE (0xBE)]
Error Code 191Cannot run %1 in Win32 mode. [ERROR_INVALID_EXE_SIGNATURE (0xBF)]
Error Code 192The operating system cannot run %1. [ERROR_EXE_MARKED_INVALID (0xC0)]
Error Code 193%1 is not a valid Win32 application. [ERROR_BAD_EXE_FORMAT (0xC1)]
Error Code 194The operating system cannot run %1. [ERROR_ITERATED_DATA_EXCEEDS_64k (0xC2)]
Error Code 195The operating system cannot run %1. [ERROR_INVALID_MINALLOCSIZE (0xC3)]
Error Code 196The operating system cannot run this application program. [ERROR_DYNLINK_FROM_INVALID_RING (0xC4)]
Error Code 197The operating system is not presently configured to run this application. [ERROR_IOPL_NOT_ENABLED (0xC5)]
Error Code 198The operating system cannot run %1. [ERROR_INVALID_SEGDPL (0xC6)]
Error Code 199The operating system cannot run this application program. [ERROR_AUTODATASEG_EXCEEDS_64k (0xC7)]
Error Code 200The code segment cannot be greater than or equal to 64K. [ERROR_RING2SEG_MUST_BE_MOVABLE (0xC8)]
Error Code 201The operating system cannot run %1. [ERROR_RELOC_CHAIN_XEEDS_SEGLIM (0xC9)]
Error Code 202The operating system cannot run %1. [ERROR_INFLOOP_IN_RELOC_CHAIN (0xCA)]
Error Code 203The system could not find the environment option that was entered. [ERROR_ENVVAR_NOT_FOUND (0xCB)]
Error Code 205No process in the command subtree has a signal handler. [ERROR_NO_SIGNAL_SENT (0xCD)]
Error Code 206The filename or extension is too long. [ERROR_FILENAME_EXCED_RANGE (0xCE)]
Error Code 207The ring 2 stack is in use. [ERROR_RING2_STACK_IN_USE (0xCF)]
Error Code 208The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. [ERROR_META_EXPANSION_TOO_LONG (0xD0)]
Error Code 209The signal being posted is not correct. [ERROR_INVALID_SIGNAL_NUMBER (0xD1)]
Error Code 210The signal handler cannot be set. [ERROR_THREAD_1_INACTIVE (0xD2)]
Error Code 212The segment is locked and cannot be reallocated. [ERROR_LOCKED (0xD4)]
Error Code 214Too many dynamic-link modules are attached to this program or dynamic-link module. [ERROR_TOO_MANY_MODULES (0xD6)]
Error Code 215Cannot nest calls to LoadModule. [ERROR_NESTING_NOT_ALLOWED (0xD7)]
Error Code 216The version of %1 is not compatible with the version you’re running. Check your computer’s system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher. [ERROR_EXE_MACHINE_TYPE_MISMATCH (0xD8)]
Error Code 217The image file %1 is signed, unable to modify. [ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY (0xD9)]
Error Code 218The image file %1 is strong signed, unable to modify. [ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY (0xDA)]
Error Code 220This file is checked out or locked for editing by another user. [ERROR_FILE_CHECKED_OUT (0xDC)]
Error Code 221The file must be checked out before saving changes. [ERROR_CHECKOUT_REQUIRED (0xDD)]
Error Code 222The file type being saved or retrieved has been blocked. [ERROR_BAD_FILE_TYPE (0xDE)]
Error Code 223The file size exceeds the limit allowed and cannot be saved. [ERROR_FILE_TOO_LARGE (0xDF)]
Error Code 224Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site and select the option to login automatically. [ERROR_FORMS_AUTH_REQUIRED (0xE0)]
Error Code 225Operation did not complete successfully because the file contains a virus. [ERROR_VIRUS_INFECTED (0xE1)]
Error Code 226This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location. [ERROR_VIRUS_DELETED (0xE2)]
Error Code 229The pipe is local. [ERROR_PIPE_LOCAL (0xE5)]
Error Code 230The pipe state is invalid. [ERROR_BAD_PIPE (0xE6)]
Error Code 231All pipe instances are busy. [ERROR_PIPE_BUSY (0xE7)]
Error Code 232The pipe is being closed. [ERROR_NO_DATA (0xE8)]
Error Code 233No process is on the other end of the pipe. [ERROR_PIPE_NOT_CONNECTED (0xE9)]
Error Code 234More data is available. [ERROR_MORE_DATA (0xEA)]
Error Code 240The session was canceled. [ERROR_VC_DISCONNECTED (0xF0)]
Error Code 254The specified extended attribute name was invalid. [ERROR_INVALID_EA_NAME (0xFE)]
Error Code 255The extended attributes are inconsistent. [ERROR_EA_LIST_INCONSISTENT (0xFF)]
Error Code 258The wait operation timed out. [WAIT_TIMEOUT (0x102)]
Error Code 259No more data is available. [ERROR_NO_MORE_ITEMS (0x103)]
Error Code 266The copy functions cannot be used. [ERROR_CANNOT_COPY (0x10A)]
Error Code 267The directory name is invalid. [ERROR_DIRECTORY (0x10B)]
Error Code 275The extended attributes did not fit in the buffer. [ERROR_EAS_DIDNT_FIT (0x113)]
Error Code 276The extended attribute file on the mounted file system is corrupt. [ERROR_EA_FILE_CORRUPT (0x114)]
Error Code 277The extended attribute table file is full. [ERROR_EA_TABLE_FULL (0x115)]
Error Code 278The specified extended attribute handle is invalid. [ERROR_INVALID_EA_HANDLE (0x116)]
Error Code 282The mounted file system does not support extended attributes. [ERROR_EAS_NOT_SUPPORTED (0x11A)]
Error Code 288Attempt to release mutex not owned by caller. [ERROR_NOT_OWNER (0x120)]
Error Code 298Too many posts were made to a semaphore. [ERROR_TOO_MANY_POSTS (0x12A)]
Error Code 299Only part of a ReadProcessMemory or WriteProcessMemory request was completed. [ERROR_PARTIAL_COPY (0x12B)]
Error Code 300The oplock request is denied. [ERROR_OPLOCK_NOT_GRANTED (0x12C)]
Error Code 301An invalid oplock acknowledgment was received by the system. [ERROR_INVALID_OPLOCK_PROTOCOL (0x12D)]
Error Code 302The volume is too fragmented to complete this operation. [ERROR_DISK_TOO_FRAGMENTED (0x12E)]
Error Code 303The file cannot be opened because it is in the process of being deleted. [ERROR_DELETE_PENDING (0x12F)]
Error Code 317The system cannot find message text for message number 0x%1 in the message file for %2. [ERROR_MR_MID_NOT_FOUND (0x13D)]
Error Code 318The scope specified was not found. [ERROR_SCOPE_NOT_FOUND (0x13E)]
Error Code 350No action was taken as a system reboot is required. [ERROR_FAIL_NOACTION_REBOOT (0x15E)]
Error Code 351The shutdown operation failed. [ERROR_FAIL_SHUTDOWN (0x15F)]
Error Code 352The restart operation failed. [ERROR_FAIL_RESTART (0x160)]
Error Code 353The maximum number of sessions has been reached. [ERROR_MAX_SESSIONS_REACHED (0x161)]
Error Code 400The thread is already in background processing mode. [ERROR_THREAD_MODE_ALREADY_BACKGROUND (0x190)]
Error Code 401The thread is not in background processing mode. [ERROR_THREAD_MODE_NOT_BACKGROUND (0x191)]
Error Code 402The process is already in background processing mode. [ERROR_PROCESS_MODE_ALREADY_BACKGROUND (0x192)]
Error Code 403The process is not in background processing mode. [ERROR_PROCESS_MODE_NOT_BACKGROUND (0x193)]
Error Code 487Attempt to access invalid
address. [ERROR_INVALID_ADDRESS (0x1E7)]
Error Code 500User profile cannot be loaded. [ERROR_USER_PROFILE_LOAD (0x1F4)]
Error Code 534Arithmetic result exceeded 32 bits. [ERROR_ARITHMETIC_OVERFLOW (0x216)]
Error Code 535There is a process on other end of the pipe. [ERROR_PIPE_CONNECTED (0x217)]
Error Code 536Waiting for a process to open the other end of the pipe. [ERROR_PIPE_LISTENING (0x218)]
Error Code 537Application verifier has found an error in the current process. [ERROR_VERIFIER_STOP (0x219)]
Error Code 538An error occurred in the ABIOS subsystem. [ERROR_ABIOS_ERROR (0x21A)]
Error Code 539A warning occurred in the WX86 subsystem. [ERROR_WX86_WARNING (0x21B)]
Error Code 540An error occurred in the WX86 subsystem. [ERROR_WX86_ERROR (0x21C)]
Error Code 541An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine. [ERROR_TIMER_NOT_CANCELED (0x21D)]
Error Code 542Unwind exception code. [ERROR_UNWIND (0x21E)]
Error Code 543An invalid or unaligned stack was encountered during an unwind operation. [ERROR_BAD_STACK (0x21F)]
Error Code 544An invalid unwind target was encountered during an unwind operation. [ERROR_INVALID_UNWIND_TARGET (0x220)]
Error Code 545Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort [ERROR_INVALID_PORT_ATTRIBUTES (0x221)]
Error Code 546Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port. [ERROR_PORT_MESSAGE_TOO_LONG (0x222)]
Error Code 547An attempt was made to lower a quota limit below the current usage. [ERROR_INVALID_QUOTA_LOWER (0x223)]
Error Code 548An attempt was made to attach to a device that was already attached to another device. [ERROR_DEVICE_ALREADY_ATTACHED (0x224)]
Error Code 549An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references. [ERROR_INSTRUCTION_MISALIGNMENT (0x225)]
Error Code 550Profiling not started. [ERROR_PROFILING_NOT_STARTED (0x226)]
Error Code 551Profiling not stopped. [ERROR_PROFILING_NOT_STOPPED (0x227)]
Error Code 552The passed ACL did not contain the minimum required information. [ERROR_COULD_NOT_INTERPRET (0x228)]
Error Code 553The number of active profiling objects is at the maximum and no more may be started. [ERROR_PROFILING_AT_LIMIT (0x229)]
Error Code 554Used to indicate that an operation cannot continue without blocking for I/O. [ERROR_CANT_WAIT (0x22A)]
Error Code 555Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process. [ERROR_CANT_TERMINATE_SELF (0x22B)]
Error Code 556If an MM error is returned which is not defined in the standard FsRtl filter [ERROR_UNEXPECTED_MM_CREATE_ERR (0x22C)]
Error Code 557If an MM error is returned which is not defined in the standard FsRtl filter [ERROR_UNEXPECTED_MM_MAP_ERROR (0x22D)]
Error Code 558If an MM error is returned which is not defined in the standard FsRtl filter [ERROR_UNEXPECTED_MM_EXTEND_ERR (0x22E)]
Error Code 559A malformed function table was encountered during an unwind operation. [ERROR_BAD_FUNCTION_TABLE (0x22F)]
Error Code 560Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail [ERROR_NO_GUID_TRANSLATION (0x230)]
Error Code 561Indicates that an attempt was made to grow an LDT by setting its size [ERROR_INVALID_LDT_SIZE (0x231)]
Error Code 563Indicates that the starting value for the LDT information was not an integral multiple of the selector size. [ERROR_INVALID_LDT_OFFSET (0x233)]
Error Code 564Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors. [ERROR_INVALID_LDT_DESCRIPTOR (0x234)]
Error Code 565Indicates a process has too many threads to perform the requested action. For example [ERROR_TOO_MANY_THREADS (0x235)]
Error Code 566An attempt was made to operate on a thread within a specific process [ERROR_THREAD_NOT_IN_PROCESS (0x236)]
Error Code 567Page file quota was exceeded. [ERROR_PAGEFILE_QUOTA_EXCEEDED (0x237)]
Error Code 568The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role. [ERROR_LOGON_SERVER_CONFLICT (0x238)]
Error Code 569The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required. [ERROR_SYNCHRONIZATION_REQUIRED (0x239)]
Error Code 570The NtCreateFile API failed. This error should never be returned to an application [ERROR_NET_OPEN_FAILED (0x23A)]
Error Code 571{Privilege Failed} The I/O permissions for the process could not be changed. [ERROR_IO_PRIVILEGE_FAILED (0x23B)]
Error Code 572{Application Exit by CTRL+C} The application terminated as a result of a CTRL+C. [ERROR_CONTROL_C_EXIT (0x23C)]
Error Code 573{Missing System File} The required system file %hs is bad or missing. [ERROR_MISSING_SYSTEMFILE (0x23D)]
Error Code 574{Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx. [ERROR_UNHANDLED_EXCEPTION (0x23E)]
Error Code 575{Application Error} The application failed to initialize properly (0x%lx). Click OK to terminate the application. [ERROR_APP_INIT_FAILURE (0x23F)]
Error Code 576{Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld. [ERROR_PAGEFILE_CREATE_FAILED (0x240)]
Error Code 577Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged [ERROR_INVALID_IMAGE_HASH (0x241)]
Error Code 578{No Paging File Specified} No paging file was specified in the system configuration. [ERROR_NO_PAGEFILE (0x242)]
Error Code 579{EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present. [ERROR_ILLEGAL_FLOAT_CONTEXT (0x243)]
Error Code 580An event pair synchronization operation was performed using the thread specific client/server event pair object [ERROR_NO_EVENT_PAIR (0x244)]
Error Code 581A Windows Server has an incorrect configuration. [ERROR_DOMAIN_CTRLR_CONFIG_ERROR (0x245)]
Error Code 582An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE. [ERROR_ILLEGAL_CHARACTER (0x246)]
Error Code 583The Unicode character is not defined in the Unicode character set installed on the system. [ERROR_UNDEFINED_CHARACTER (0x247)]
Error Code 584The paging file cannot be created on a floppy diskette. [ERROR_FLOPPY_VOLUME (0x248)]
Error Code 585The system BIOS failed to connect a system interrupt to the device or bus to which the device is connected. [ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT (0x249)]
Error Code 586This operation is only allowed for the Primary Domain Controller of the domain. [ERROR_BACKUP_CONTROLLER (0x24A)]
Error Code 587An attempt was made to acquire a mutant such that its maximum count would have been exceeded. [ERROR_MUTANT_LIMIT_EXCEEDED (0x24B)]
Error Code 588A volume has been accessed for which a file system driver is required that has not yet been loaded. [ERROR_FS_DRIVER_REQUIRED (0x24C)]
Error Code 589{Registry File Failure} The registry cannot load the hive (file)
Error Code 590{Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process [ERROR_DEBUG_ATTACH_FAILED (0x24E)]
Error Code 591{Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down. [ERROR_SYSTEM_PROCESS_TERMINATED (0x24F)]
Error Code 592{Data Not Accepted} The TDI client could not handle the data received during an indication. [ERROR_DATA_NOT_ACCEPTED (0x250)]
Error Code 593NTVDM encountered a hard error. [ERROR_VDM_HARD_ERROR (0x251)]
Error Code 594{Cancel Timeout} The driver %hs failed to complete a canceled I/O request in the allotted time. [ERROR_DRIVER_CANCEL_TIMEOUT (0x252)]
Error Code 595{Reply Message Mismatch} An attempt was made to reply to an LPC message [ERROR_REPLY_MESSAGE_MISMATCH (0x253)]
Error Code 596{Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. [ERROR_LOST_WRITEBEHIND_DATA (0x254)]
Error Code 597The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window. [ERROR_CLIENT_SERVER_PARAMETERS_INVALID (0x255)]
Error Code 598The stream is not a tiny stream. [ERROR_NOT_TINY_STREAM (0x256)]
Error Code 599The request must be handled by the stack overflow code. [ERROR_STACK_OVERFLOW_READ (0x257)]
Error Code 600Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream. [ERROR_CONVERT_TO_LARGE (0x258)]
Error Code 601The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation. [ERROR_FOUND_OUT_OF_SCOPE (0x259)]
Error Code 602The bucket array must be grown. Retry transaction after doing so. [ERROR_ALLOCATE_BUCKET (0x25A)]
Error Code 603The user/kernel marshalling buffer has overflowed. [ERROR_MARSHALL_OVERFLOW (0x25B)]
Error Code 604The supplied variant structure contains invalid data. [ERROR_INVALID_VARIANT (0x25C)]
Error Code 605The specified buffer contains ill-formed data. [ERROR_BAD_COMPRESSION_BUFFER (0x25D)]
Error Code 606{Audit Failed} An attempt to generate a security audit failed. [ERROR_AUDIT_FAILED (0x25E)]
Error Code 607The timer resolution was not previously set by the current process. [ERROR_TIMER_RESOLUTION_NOT_SET (0x25F)]
Error Code 608There is insufficient account information to log you on. [ERROR_INSUFFICIENT_LOGON_INFO (0x260)]
Error Code 609{Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly. [ERROR_BAD_DLL_ENTRYPOINT (0x261)]
Error Code 610{Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However [ERROR_BAD_SERVICE_ENTRYPOINT (0x262)]
Error Code 611There is an IP address conflict with another system on the network [ERROR_IP_ADDRESS_CONFLICT1 (0x263)]
Error Code 612There is an IP address conflict with another system on the network [ERROR_IP_ADDRESS_CONFLICT2 (0x264)]
Error Code 613{Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored. [ERROR_REGISTRY_QUOTA_LIMIT (0x265)]
Error Code 614A callback return system service cannot be executed when no callback is active. [ERROR_NO_CALLBACK_ACTIVE (0x266)]
Error Code 615The password provided is too short to meet the policy of your user account. Please choose a longer password. [ERROR_PWD_TOO_SHORT (0x267)]
Error Code 616The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar [ERROR_PWD_TOO_RECENT (0x268)]
Error Code 617You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used. [ERROR_PWD_HISTORY_CONFLICT (0x269)]
Error Code 618The specified compression format is unsupported. [ERROR_UNSUPPORTED_COMPRESSION (0x26A)]
Error Code 619The specified hardware profile configuration is invalid. [ERROR_INVALID_HW_PROFILE (0x26B)]
Error Code 620The specified Plug and Play registry device path is invalid. [ERROR_INVALID_PLUGPLAY_DEVICE_PATH (0x26C)]
Error Code 621The specified quota list is internally inconsistent with its descriptor. [ERROR_QUOTA_LIST_INCONSISTENT (0x26D)]
Error Code 622{Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows [ERROR_EVALUATION_EXPIRATION (0x26E)]
Error Code 623{Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL. [ERROR_ILLEGAL_DLL_RELOCATION (0x26F)]
Error Code 624{DLL Initialization Failed} The application failed to initialize because the window station is shutting down. [ERROR_DLL_INIT_FAILED_LOGOFF (0x270)]
Error Code 625The validation process needs to continue on to the next step. [ERROR_VALIDATE_CONTINUE (0x271)]
Error Code 626There are no more matches for the current index enumeration. [ERROR_NO_MORE_MATCHES (0x272)]
Error Code 627The range could not be added to the range list because of a conflict. [ERROR_RANGE_LIST_CONFLICT (0x273)]
Error Code 628The server process is running under a SID different than that required by client. [ERROR_SERVER_SID_MISMATCH (0x274)]
Error Code 629A group marked use for deny only cannot be enabled. [ERROR_CANT_ENABLE_DENY_ONLY (0x275)]
Error Code 630{EXCEPTION} Multiple floating point faults. [ERROR_FLOAT_MULTIPLE_FAULTS (0x276)]
Error Code 631{EXCEPTION} Multiple floating point traps. [ERROR_FLOAT_MULTIPLE_TRAPS (0x277)]
Error Code 632The requested interface is not supported. [ERROR_NOINTERFACE (0x278)]
Error Code 633{System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode. [ERROR_DRIVER_FAILED_SLEEP (0x279)]
Error Code 634The system file %1 has become corrupt and has been replaced. [ERROR_CORRUPT_SYSTEM_FILE (0x27A)]
Error Code 635{Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process [ERROR_COMMITMENT_MINIMUM (0x27B)]
Error Code 636A device was removed so enumeration must be restarted. [ERROR_PNP_RESTART_ENUMERATION (0x27C)]
Error Code 637{Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down. [ERROR_SYSTEM_IMAGE_BAD_SIGNATURE (0x27D)]
Error Code 638Device will not start without a reboot. [ERROR_PNP_REBOOT_REQUIRED (0x27E)]
Error Code 639There is not enough power to complete the requested operation. [ERROR_INSUFFICIENT_POWER (0x27F)]
Error Code 640ERROR_MULTIPLE_FAULT_VIOLATION [ERROR_MULTIPLE_FAULT_VIOLATION (0x280)]
Error Code 641The system is in the process of shutting down. [ERROR_SYSTEM_SHUTDOWN (0x281)]
Error Code 642An attempt to remove a processes DebugPort was made [ERROR_PORT_NOT_SET (0x282)]
Error Code 643This version of Windows is not compatible with the behavior version of directory forest [ERROR_DS_VERSION_CHECK_FAILURE (0x283)]
Error Code 644The specified range could not be found in the range list. [ERROR_RANGE_NOT_FOUND (0x284)]
Error Code 646The driver was not loaded because the system is booting into safe mode. [ERROR_NOT_SAFE_MODE_DRIVER (0x286)]
Error Code 647The driver was not loaded because it failed it’s initialization call. [ERROR_FAILED_DRIVER_ENTRY (0x287)]
Error Code 648The “%hs” encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection. [ERROR_DEVICE_ENUMERATION_ERROR (0x288)]
Error Code 649The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached. [ERROR_MOUNT_POINT_NOT_RESOLVED (0x289)]
Error Code 650The device object parameter is either not a valid device object or is not attached to the volume specified by the file name. [ERROR_INVALID_DEVICE_OBJECT_PARAMETER (0x28A)]
Error Code 651A Machine Check Error has occurred. Please check the system eventlog for additional information. [ERROR_MCA_OCCURED (0x28B)]
Error Code 652There was error [%2] processing the driver database. [ERROR_DRIVER_DATABASE_ERROR (0x28C)]
Error Code 653System hive size has exceeded its limit. [ERROR_SYSTEM_HIVE_TOO_LARGE (0x28D)]
Error Code 654The driver could not be loaded because a previous version of the driver is still in memory. [ERROR_DRIVER_FAILED_PRIOR_UNLOAD (0x28E)]
Error Code 655{Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation. [ERROR_VOLSNAP_PREPARE_HIBERNATE (0x28F)]
Error Code 656The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted. [ERROR_HIBERNATION_FAILURE (0x290)]
Error Code 665The requested operation could not be completed due to a file system limitation [ERROR_FILE_SYSTEM_LIMITATION (0x299)]
Error Code 668An assertion failure has occurred. [ERROR_ASSERTION_FAILURE (0x29C)]
Error Code 669An error occurred in the ACPI subsystem. [ERROR_ACPI_ERROR (0x29D)]
Error Code 670WOW Assertion Error. [ERROR_WOW_ASSERTION (0x29E)]
Error Code 671A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update. [ERROR_PNP_BAD_MPS_TABLE (0x29F)]
Error Code 672A translator failed to translate resources. [ERROR_PNP_TRANSLATION_FAILED (0x2A0)]
Error Code 673A IRQ translator failed to translate resources. [ERROR_PNP_IRQ_TRANSLATION_FAILED (0x2A1)]
Error Code 674Driver %2 returned invalid ID for a child device (%3). [ERROR_PNP_INVALID_ID (0x2A2)]
Error Code 675{Kernel Debugger Awakened} the system debugger was awakened by an interrupt. [ERROR_WAKE_SYSTEM_DEBUGGER (0x2A3)]
0Shares

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top