The following are computer error codes and their meanings
| Windows System Error Code List | |
|---|---|
| Code | Description |
| Error Code 1 | Incorrect function. [ERROR_INVALID_FUNCTION (0x1)] |
| Error Code 2 | The system cannot find the file specified. [ERROR_FILE_NOT_FOUND (0x2)] |
| Error Code 3 | The system cannot find the path specified. [ERROR_PATH_NOT_FOUND (0x3)] |
| Error Code 4 | The system cannot open the file. [ERROR_TOO_MANY_OPEN_FILES (0x4)] |
| Error Code 5 | Access is denied. [ERROR_ACCESS_DENIED (0x5)] |
| Error Code 6 | The handle is invalid. [ERROR_INVALID_HANDLE (0x6)] |
| Error Code 7 | The storage control blocks were destroyed. [ERROR_ARENA_TRASHED (0x7)] |
| Error Code 8 | Not enough storage is available to process this command. [ERROR_NOT_ENOUGH_MEMORY (0x8)] |
| Error Code 9 | The storage control block address is invalid. [ERROR_INVALID_BLOCK (0x9)] |
| Error Code 10 | The environment is incorrect. [ERROR_BAD_ENVIRONMENT (0xA)] |
| Error Code 11 | An attempt was made to load a program with an incorrect format. [ERROR_BAD_FORMAT (0xB)] |
| Error Code 12 | The access code is invalid. [ERROR_INVALID_ACCESS (0xC)] |
| Error Code 13 | The data is invalid. [ERROR_INVALID_DATA (0xD)] |
| Error Code 14 | Not enough storage is available to complete this operation. [ERROR_OUTOFMEMORY (0xE)] |
| Error Code 15 | The system cannot find drive specified. [ERROR_INVALID_DRIVE (0xF)] |
| Error Code 16 | The directory cannot be removed. [ERROR_CURRENT_DIRECTORY (0x10)] |
| Error Code 17 | The system cannot move the file to a different disk drive. [ERROR_NOT_SAME_DEVICE (0x11)] |
| Error Code 18 | There are no more files [ERROR_NO_MORE_FILES (0x12)] |
| Error Code 19 | The media is write protected. [ERROR_WRITE_PROTECT (0x13)] |
| Error Code 20 | The system cannot find the device specified. [ERROR_BAD_UNIT (0x14)] |
| Error Code 21 | The device is not ready. [ERROR_NOT_READY (0x15)] |
| Error Code 22 | The device does not recognize the command. [ERROR_BAD_COMMAND (0x16)] |
| Error Code 23 | Data error (cyclic redundancy check). [ERROR_CRC (0x17)] |
| Error Code 24 | The program issued a command but the command length is incorrect. [ERROR_BAD_LENGTH (0x18)] |
| Error Code 25 | The drive cannot locate a specific area or track on the disk. [ERROR_SEEK (0x19)] |
| Error Code 26 | The specified disk or diskette cannot be accessed. [ERROR_NOT_DOS_DISK (0x1A)] |
| Error Code 27 | The drive cannot find the sector requested. [ERROR_SECTOR_NOT_FOUND (0x1B)] |
| Error Code 28 | The printer is out of paper. [ERROR_OUT_OF_PAPER (0x1C)] |
| Error Code 29 | The system cannot write to the specified device. [ERROR_WRITE_FAULT (0x1D)] |
| Error Code 30 | The system cannot read from the specified device. [ERROR_READ_FAULT (0x1E)] |
| Error Code 31 | A device attached to the system is not functioning. [ERROR_GEN_FAILURE (0x1F)] |
| Error Code 32 | The process cannot access the file because it is being used by another process. [ERROR_SHARING_VIOLATION (0x20)] |
| Error Code 33 | The process cannot access the file because another process has locked a portion of the file. [ERROR_LOCK_VIOLATION (0x21)] |
| Error Code 34 | The wrong diskette is in the drive. Insert %2 (Volume Serial Number |
| Error Code 36 | Too many files opened for sharing. [ERROR_SHARING_BUFFER_EXCEEDED (0x24)] |
| Error Code 38 | Reached the end of the file. [ERROR_HANDLE_EOF (0x26)] |
| Error Code 39 | The disk is full. [ERROR_HANDLE_DISK_FULL (0x27)] |
| Error Code 50 | The request is not supported. [ERROR_NOT_SUPPORTED (0x32)] |
| Error Code 51 | Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path contact your network administrator. [ERROR_REM_NOT_LIST (0x33)] |
| Error Code 52 | You were not connected because a duplicate name exists on the network. If joining a domain, go to System in Control Panel to change the computer name and try again. If joining a workgroup choose another workgroup name. [ERROR_DUP_NAME (0x34)] |
| Error Code 53 | The network path was not found. [ERROR_BAD_NETPATH (0x35)] |
| Error Code 54 | The network is busy. [ERROR_NETWORK_BUSY (0x36)] |
| Error Code 55 | The specified network resource or device is no longer available. [ERROR_DEV_NOT_EXIST (0x37)] |
| Error Code 56 | The network BIOS command limit has been reached. [ERROR_TOO_MANY_CMDS (0x38)] |
| Error Code 57 | A network adapter hardware error occurred. [ERROR_ADAP_HDW_ERR (0x39)] |
| Error Code 58 | The specified server cannot perform the requested operation. [ERROR_BAD_NET_RESP (0x3A)] |
| Error Code 59 | An unexpected network error occurred. [ERROR_UNEXP_NET_ERR (0x3B)] |
| Error Code 60 | The remote adapter is not compatible. [ERROR_BAD_REM_ADAP (0x3C)] |
| Error Code 61 | The printer queue is full. [ERROR_PRINTQ_FULL (0x3D)] |
| Error Code 62 | Space to store the file waiting to be printed is not available on the server. [ERROR_NO_SPOOL_SPACE (0x3E)] |
| Error Code 63 | Your file waiting to be printed was deleted. [ERROR_PRINT_CANCELLED (0x3F)] |
| Error Code 64 | The specified network name is no longer available. [ERROR_NETNAME_DELETED (0x40)] |
| Error Code 65 | Network access is denied. [ERROR_NETWORK_ACCESS_DENIED (0x41)] |
| Error Code 66 | The network resource type is not correct. [ERROR_BAD_DEV_TYPE (0x42)] |
| Error Code 67 | The network name cannot be found. [ERROR_BAD_NET_NAME (0x43)] |
| Error Code 68 | The name limit for the local computer network adapter card was exceeded. [ERROR_TOO_MANY_NAMES (0x44)] |
| Error Code 69 | The network BIOS session limit was exceeded. [ERROR_TOO_MANY_SESS (0x45)] |
| Error Code 70 | The remote server has been paused or is in the process of being started. [ERROR_SHARING_PAUSED (0x46)] |
| Error Code 71 | No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept. [ERROR_REQ_NOT_ACCEP (0x47)] |
| Error Code 72 | The specified printer or disk device has been paused. [ERROR_REDIR_PAUSED (0x48)] |
| Error Code 80 | The file exists. [ERROR_FILE_EXISTS (0x50)] |
| Error Code 82 | The directory or file cannot be created. [ERROR_CANNOT_MAKE (0x52)] |
| Error Code 83 | Fail on INT 24. [ERROR_FAIL_I24 (0x53)] |
| Error Code 84 | Storage to process this request is not available. [ERROR_OUT_OF_STRUCTURES (0x54)] |
| Error Code 85 | The local device name is already in use. [ERROR_ALREADY_ASSIGNED (0x55)] |
| Error Code 86 | The specified network password is not correct. [ERROR_INVALID_PASSWORD (0x56)] |
| Error Code 87 | The parameter is incorrect. [ERROR_INVALID_PARAMETER (0x57)] |
| Error Code 88 | A write fault occurred on the network. [ERROR_NET_WRITE_FAULT (0x58)] |
| Error Code 89 | The system cannot start another process at this time. [ERROR_NO_PROC_SLOTS (0x59)] |
| Error Code 100 | Cannot create another system semaphore. [ERROR_TOO_MANY_SEMAPHORES (0x64)] |
| Error Code 101 | The exclusive semaphore is owned by another process. [ERROR_EXCL_SEM_ALREADY_OWNED (0x65)] |
| Error Code 102 | The semaphore is set and cannot be closed. [ERROR_SEM_IS_SET (0x66)] |
| Error Code 103 | The semaphore cannot be set again. [ERROR_TOO_MANY_SEM_REQUESTS (0x67)] |
| Error Code 104 | Cannot request exclusive semaphores at interrupt time. [ERROR_INVALID_AT_INTERRUPT_TIME (0x68)] |
| Error Code 105 | The previous ownership of this semaphore has ended. [ERROR_SEM_OWNER_DIED (0x69)] |
| Error Code 106 | Insert the diskette for drive %1. [ERROR_SEM_USER_LIMIT (0x6A)] |
| Error Code 107 | The program stopped because an alternate diskette was not inserted. [ERROR_DISK_CHANGE (0x6B)] |
| Error Code 108 | The disk is in use or locked by another process. [ERROR_DRIVE_LOCKED (0x6C)] |
| Error Code 109 | The pipe has been ended. [ERROR_BROKEN_PIPE (0x6D)] |
| Error Code 110 | The system cannot open the device or file specified. [ERROR_OPEN_FAILED (0x6E)] |
| Error Code 111 | The file name is too long. [ERROR_BUFFER_OVERFLOW (0x6F)] |
| Error Code 112 | There is not enough space on the disk. [ERROR_DISK_FULL (0x70)] |
| Error Code 113 | No more internal file identifiers available. [ERROR_NO_MORE_SEARCH_HANDLES (0x71)] |
| Error Code 114 | The target internal file identifier is incorrect. [ERROR_INVALID_TARGET_HANDLE (0x72)] |
| Error Code 117 | The IOCTL call made by the application program is not correct. [ERROR_INVALID_CATEGORY (0x75)] |
| Error Code 118 | The verify-on-write switch parameter value is not correct. [ERROR_INVALID_VERIFY_SWITCH (0x76)] |
| Error Code 119 | The system does not support the command requested. [ERROR_BAD_DRIVER_LEVEL (0x77)] |
| Error Code 120 | This function is not supported on this system. [ERROR_CALL_NOT_IMPLEMENTED (0x78)] |
| Error Code 121 | The semaphore timeout period has expired. [ERROR_SEM_TIMEOUT (0x79)] |
| Error Code 122 | The data area passed to a system call is too small. [ERROR_INSUFFICIENT_BUFFER (0x7A)] |
| Error Code 123 | The filename, directory name or volume label syntax is incorrect. [ERROR_INVALID_NAME (0x7B)] |
| Error Code 124 | The system call level is not correct. [ERROR_INVALID_LEVEL (0x7C)] |
| Error Code 125 | The disk has no volume label. [ERROR_NO_VOLUME_LABEL (0x7D)] |
| Error Code 126 | The specified module could not be found. [ERROR_MOD_NOT_FOUND (0x7E)] |
| Error Code 127 | The specified procedure could not be found. [ERROR_PROC_NOT_FOUND (0x7F)] |
| Error Code 128 | There are no child processes to wait for. [ERROR_WAIT_NO_CHILDREN (0x80)] |
| Error Code 129 | The %1 application cannot be run in Win32 mode. [ERROR_CHILD_NOT_COMPLETE (0x81)] |
| Error Code 130 | Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O. [ERROR_DIRECT_ACCESS_HANDLE (0x82)] |
| Error Code 131 | An attempt was made to move the file pointer before the beginning of the file. [ERROR_NEGATIVE_SEEK (0x83)] |
| Error Code 132 | The file pointer cannot be set on the specified device or file. [ERROR_SEEK_ON_DEVICE (0x84)] |
| Error Code 133 | A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. [ERROR_IS_JOIN_TARGET (0x85)] |
| Error Code 134 | An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. [ERROR_IS_JOINED (0x86)] |
| Error Code 135 | An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. [ERROR_IS_SUBSTED (0x87)] |
| Error Code 136 | The system tried to delete the JOIN of a drive that is not joined. [ERROR_NOT_JOINED (0x88)] |
| Error Code 137 | The system tried to delete the substitution of a drive that is not substituted. [ERROR_NOT_SUBSTED (0x89)] |
| Error Code 138 | The system tried to join a drive to a directory on a joined drive. [ERROR_JOIN_TO_JOIN (0x8A)] |
| Error Code 139 | The system tried to substitute a drive to a directory on a substituted drive. [ERROR_SUBST_TO_SUBST (0x8B)] |
| Error Code 140 | The system tried to join a drive to a directory on a substituted drive. [ERROR_JOIN_TO_SUBST (0x8C)] |
| Error Code 141 | The system tried to SUBST a drive to a directory on a joined drive. [ERROR_SUBST_TO_JOIN (0x8D)] |
| Error Code 142 | The system cannot perform a JOIN or SUBST at this time. [ERROR_BUSY_DRIVE (0x8E)] |
| Error Code 143 | The system cannot join or substitute a drive to or for a directory on the same drive. [ERROR_SAME_DRIVE (0x8F)] |
| Error Code 144 | The directory is not a subdirectory of the root directory. [ERROR_DIR_NOT_ROOT (0x90)] |
| Error Code 145 | The directory is not empty. [ERROR_DIR_NOT_EMPTY (0x91)] |
| Error Code 146 | The path specified is being used in a substitute. [ERROR_IS_SUBST_PATH (0x92)] |
| Error Code 147 | Not enough resources are available to process this command. [ERROR_IS_JOIN_PATH (0x93)] |
| Error Code 148 | The path specified cannot be used at this time. [ERROR_PATH_BUSY (0x94)] |
| Error Code 149 | An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. [ERROR_IS_SUBST_TARGET (0x95)] |
| Error Code 150 | System trace information was not specified in your CONFIG.SYS file or tracing is disallowed. [ERROR_SYSTEM_TRACE (0x96)] |
| Error Code 151 | The number of specified semaphore events for DosMuxSemWait is not correct. [ERROR_INVALID_EVENT_COUNT (0x97)] |
| Error Code 152 | DosMuxSemWait did not execute too many semaphores are already set. [ERROR_TOO_MANY_MUXWAITERS (0x98)] |
| Error Code 153 | The DosMuxSemWait list is not correct. [ERROR_INVALID_LIST_FORMAT (0x99)] |
| Error Code 154 | The volume label you entered exceeds the label character limit of the target file system. [ERROR_LABEL_TOO_LONG (0x9A)] |
| Error Code 155 | Cannot create another thread. [ERROR_TOO_MANY_TCBS (0x9B)] |
| Error Code 156 | The recipient process has refused the signal. [ERROR_SIGNAL_REFUSED (0x9C)] |
| Error Code 157 | The segment is already discarded and cannot be locked. [ERROR_DISCARDED (0x9D)] |
| Error Code 158 | The segment is already unlocked. [ERROR_NOT_LOCKED (0x9E)] |
| Error Code 159 | The address for the thread ID is not correct. [ERROR_BAD_THREADID_ADDR (0x9F)] |
| Error Code 160 | One or more arguments are not correct. [ERROR_BAD_ARGUMENTS (0xA0)] |
| Error Code 161 | The specified path is invalid. [ERROR_BAD_PATHNAME (0xA1)] |
| Error Code 162 | A signal is already pending. [ERROR_SIGNAL_PENDING (0xA2)] |
| Error Code 164 | No more threads can be created in the system. [ERROR_MAX_THRDS_REACHED (0xA4)] |
| Error Code 167 | Unable to lock a region of a file. [ERROR_LOCK_FAILED (0xA7)] |
| Error Code 170 | The requested resource is in use. [ERROR_BUSY (0xAA)] |
| Error Code 173 | A lock request was not outstanding for the supplied cancel region. [ERROR_CANCEL_VIOLATION (0xAD)] |
| Error Code 174 | The file system does not support atomic changes to the lock type. [ERROR_ATOMIC_LOCKS_NOT_SUPPORTED (0xAE)] |
| Error Code 180 | The system detected a segment number that was not correct. [ERROR_INVALID_SEGMENT_NUMBER (0xB4)] |
| Error Code 182 | The operating system cannot run %1. [ERROR_INVALID_ORDINAL (0xB6)] |
| Error Code 183 | Cannot create a file when that file already exists. [ERROR_ALREADY_EXISTS (0xB7)] |
| Error Code 186 | The flag passed is not correct. [ERROR_INVALID_FLAG_NUMBER (0xBA)] |
| Error Code 187 | The specified system semaphore name was not found. [ERROR_SEM_NOT_FOUND (0xBB)] |
| Error Code 188 | The operating system cannot run %1. [ERROR_INVALID_STARTING_CODESEG (0xBC)] |
| Error Code 189 | The operating system cannot run %1. [ERROR_INVALID_STACKSEG (0xBD)] |
| Error Code 190 | The operating system cannot run %1. [ERROR_INVALID_MODULETYPE (0xBE)] |
| Error Code 191 | Cannot run %1 in Win32 mode. [ERROR_INVALID_EXE_SIGNATURE (0xBF)] |
| Error Code 192 | The operating system cannot run %1. [ERROR_EXE_MARKED_INVALID (0xC0)] |
| Error Code 193 | %1 is not a valid Win32 application. [ERROR_BAD_EXE_FORMAT (0xC1)] |
| Error Code 194 | The operating system cannot run %1. [ERROR_ITERATED_DATA_EXCEEDS_64k (0xC2)] |
| Error Code 195 | The operating system cannot run %1. [ERROR_INVALID_MINALLOCSIZE (0xC3)] |
| Error Code 196 | The operating system cannot run this application program. [ERROR_DYNLINK_FROM_INVALID_RING (0xC4)] |
| Error Code 197 | The operating system is not presently configured to run this application. [ERROR_IOPL_NOT_ENABLED (0xC5)] |
| Error Code 198 | The operating system cannot run %1. [ERROR_INVALID_SEGDPL (0xC6)] |
| Error Code 199 | The operating system cannot run this application program. [ERROR_AUTODATASEG_EXCEEDS_64k (0xC7)] |
| Error Code 200 | The code segment cannot be greater than or equal to 64K. [ERROR_RING2SEG_MUST_BE_MOVABLE (0xC8)] |
| Error Code 201 | The operating system cannot run %1. [ERROR_RELOC_CHAIN_XEEDS_SEGLIM (0xC9)] |
| Error Code 202 | The operating system cannot run %1. [ERROR_INFLOOP_IN_RELOC_CHAIN (0xCA)] |
| Error Code 203 | The system could not find the environment option that was entered. [ERROR_ENVVAR_NOT_FOUND (0xCB)] |
| Error Code 205 | No process in the command subtree has a signal handler. [ERROR_NO_SIGNAL_SENT (0xCD)] |
| Error Code 206 | The filename or extension is too long. [ERROR_FILENAME_EXCED_RANGE (0xCE)] |
| Error Code 207 | The ring 2 stack is in use. [ERROR_RING2_STACK_IN_USE (0xCF)] |
| Error Code 208 | The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified. [ERROR_META_EXPANSION_TOO_LONG (0xD0)] |
| Error Code 209 | The signal being posted is not correct. [ERROR_INVALID_SIGNAL_NUMBER (0xD1)] |
| Error Code 210 | The signal handler cannot be set. [ERROR_THREAD_1_INACTIVE (0xD2)] |
| Error Code 212 | The segment is locked and cannot be reallocated. [ERROR_LOCKED (0xD4)] |
| Error Code 214 | Too many dynamic-link modules are attached to this program or dynamic-link module. [ERROR_TOO_MANY_MODULES (0xD6)] |
| Error Code 215 | Cannot nest calls to LoadModule. [ERROR_NESTING_NOT_ALLOWED (0xD7)] |
| Error Code 216 | The version of %1 is not compatible with the version you’re running. Check your computer’s system information to see whether you need a x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher. [ERROR_EXE_MACHINE_TYPE_MISMATCH (0xD8)] |
| Error Code 217 | The image file %1 is signed, unable to modify. [ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY (0xD9)] |
| Error Code 218 | The image file %1 is strong signed, unable to modify. [ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY (0xDA)] |
| Error Code 220 | This file is checked out or locked for editing by another user. [ERROR_FILE_CHECKED_OUT (0xDC)] |
| Error Code 221 | The file must be checked out before saving changes. [ERROR_CHECKOUT_REQUIRED (0xDD)] |
| Error Code 222 | The file type being saved or retrieved has been blocked. [ERROR_BAD_FILE_TYPE (0xDE)] |
| Error Code 223 | The file size exceeds the limit allowed and cannot be saved. [ERROR_FILE_TOO_LARGE (0xDF)] |
| Error Code 224 | Access Denied. Before opening files in this location, you must first add the web site to your trusted sites list, browse to the web site and select the option to login automatically. [ERROR_FORMS_AUTH_REQUIRED (0xE0)] |
| Error Code 225 | Operation did not complete successfully because the file contains a virus. [ERROR_VIRUS_INFECTED (0xE1)] |
| Error Code 226 | This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location. [ERROR_VIRUS_DELETED (0xE2)] |
| Error Code 229 | The pipe is local. [ERROR_PIPE_LOCAL (0xE5)] |
| Error Code 230 | The pipe state is invalid. [ERROR_BAD_PIPE (0xE6)] |
| Error Code 231 | All pipe instances are busy. [ERROR_PIPE_BUSY (0xE7)] |
| Error Code 232 | The pipe is being closed. [ERROR_NO_DATA (0xE8)] |
| Error Code 233 | No process is on the other end of the pipe. [ERROR_PIPE_NOT_CONNECTED (0xE9)] |
| Error Code 234 | More data is available. [ERROR_MORE_DATA (0xEA)] |
| Error Code 240 | The session was canceled. [ERROR_VC_DISCONNECTED (0xF0)] |
| Error Code 254 | The specified extended attribute name was invalid. [ERROR_INVALID_EA_NAME (0xFE)] |
| Error Code 255 | The extended attributes are inconsistent. [ERROR_EA_LIST_INCONSISTENT (0xFF)] |
| Error Code 258 | The wait operation timed out. [WAIT_TIMEOUT (0x102)] |
| Error Code 259 | No more data is available. [ERROR_NO_MORE_ITEMS (0x103)] |
| Error Code 266 | The copy functions cannot be used. [ERROR_CANNOT_COPY (0x10A)] |
| Error Code 267 | The directory name is invalid. [ERROR_DIRECTORY (0x10B)] |
| Error Code 275 | The extended attributes did not fit in the buffer. [ERROR_EAS_DIDNT_FIT (0x113)] |
| Error Code 276 | The extended attribute file on the mounted file system is corrupt. [ERROR_EA_FILE_CORRUPT (0x114)] |
| Error Code 277 | The extended attribute table file is full. [ERROR_EA_TABLE_FULL (0x115)] |
| Error Code 278 | The specified extended attribute handle is invalid. [ERROR_INVALID_EA_HANDLE (0x116)] |
| Error Code 282 | The mounted file system does not support extended attributes. [ERROR_EAS_NOT_SUPPORTED (0x11A)] |
| Error Code 288 | Attempt to release mutex not owned by caller. [ERROR_NOT_OWNER (0x120)] |
| Error Code 298 | Too many posts were made to a semaphore. [ERROR_TOO_MANY_POSTS (0x12A)] |
| Error Code 299 | Only part of a ReadProcessMemory or WriteProcessMemory request was completed. [ERROR_PARTIAL_COPY (0x12B)] |
| Error Code 300 | The oplock request is denied. [ERROR_OPLOCK_NOT_GRANTED (0x12C)] |
| Error Code 301 | An invalid oplock acknowledgment was received by the system. [ERROR_INVALID_OPLOCK_PROTOCOL (0x12D)] |
| Error Code 302 | The volume is too fragmented to complete this operation. [ERROR_DISK_TOO_FRAGMENTED (0x12E)] |
| Error Code 303 | The file cannot be opened because it is in the process of being deleted. [ERROR_DELETE_PENDING (0x12F)] |
| Error Code 317 | The system cannot find message text for message number 0x%1 in the message file for %2. [ERROR_MR_MID_NOT_FOUND (0x13D)] |
| Error Code 318 | The scope specified was not found. [ERROR_SCOPE_NOT_FOUND (0x13E)] |
| Error Code 350 | No action was taken as a system reboot is required. [ERROR_FAIL_NOACTION_REBOOT (0x15E)] |
| Error Code 351 | The shutdown operation failed. [ERROR_FAIL_SHUTDOWN (0x15F)] |
| Error Code 352 | The restart operation failed. [ERROR_FAIL_RESTART (0x160)] |
| Error Code 353 | The maximum number of sessions has been reached. [ERROR_MAX_SESSIONS_REACHED (0x161)] |
| Error Code 400 | The thread is already in background processing mode. [ERROR_THREAD_MODE_ALREADY_BACKGROUND (0x190)] |
| Error Code 401 | The thread is not in background processing mode. [ERROR_THREAD_MODE_NOT_BACKGROUND (0x191)] |
| Error Code 402 | The process is already in background processing mode. [ERROR_PROCESS_MODE_ALREADY_BACKGROUND (0x192)] |
| Error Code 403 | The process is not in background processing mode. [ERROR_PROCESS_MODE_NOT_BACKGROUND (0x193)] |
| Error Code 487 | Attempt to access invalid address. [ERROR_INVALID_ADDRESS (0x1E7)] |
| Error Code 500 | User profile cannot be loaded. [ERROR_USER_PROFILE_LOAD (0x1F4)] |
| Error Code 534 | Arithmetic result exceeded 32 bits. [ERROR_ARITHMETIC_OVERFLOW (0x216)] |
| Error Code 535 | There is a process on other end of the pipe. [ERROR_PIPE_CONNECTED (0x217)] |
| Error Code 536 | Waiting for a process to open the other end of the pipe. [ERROR_PIPE_LISTENING (0x218)] |
| Error Code 537 | Application verifier has found an error in the current process. [ERROR_VERIFIER_STOP (0x219)] |
| Error Code 538 | An error occurred in the ABIOS subsystem. [ERROR_ABIOS_ERROR (0x21A)] |
| Error Code 539 | A warning occurred in the WX86 subsystem. [ERROR_WX86_WARNING (0x21B)] |
| Error Code 540 | An error occurred in the WX86 subsystem. [ERROR_WX86_ERROR (0x21C)] |
| Error Code 541 | An attempt was made to cancel or set a timer that has an associated APC and the subject thread is not the thread that originally set the timer with an associated APC routine. [ERROR_TIMER_NOT_CANCELED (0x21D)] |
| Error Code 542 | Unwind exception code. [ERROR_UNWIND (0x21E)] |
| Error Code 543 | An invalid or unaligned stack was encountered during an unwind operation. [ERROR_BAD_STACK (0x21F)] |
| Error Code 544 | An invalid unwind target was encountered during an unwind operation. [ERROR_INVALID_UNWIND_TARGET (0x220)] |
| Error Code 545 | Invalid Object Attributes specified to NtCreatePort or invalid Port Attributes specified to NtConnectPort [ERROR_INVALID_PORT_ATTRIBUTES (0x221)] |
| Error Code 546 | Length of message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port. [ERROR_PORT_MESSAGE_TOO_LONG (0x222)] |
| Error Code 547 | An attempt was made to lower a quota limit below the current usage. [ERROR_INVALID_QUOTA_LOWER (0x223)] |
| Error Code 548 | An attempt was made to attach to a device that was already attached to another device. [ERROR_DEVICE_ALREADY_ATTACHED (0x224)] |
| Error Code 549 | An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned instruction references. [ERROR_INSTRUCTION_MISALIGNMENT (0x225)] |
| Error Code 550 | Profiling not started. [ERROR_PROFILING_NOT_STARTED (0x226)] |
| Error Code 551 | Profiling not stopped. [ERROR_PROFILING_NOT_STOPPED (0x227)] |
| Error Code 552 | The passed ACL did not contain the minimum required information. [ERROR_COULD_NOT_INTERPRET (0x228)] |
| Error Code 553 | The number of active profiling objects is at the maximum and no more may be started. [ERROR_PROFILING_AT_LIMIT (0x229)] |
| Error Code 554 | Used to indicate that an operation cannot continue without blocking for I/O. [ERROR_CANT_WAIT (0x22A)] |
| Error Code 555 | Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and it was the last thread in the current process. [ERROR_CANT_TERMINATE_SELF (0x22B)] |
| Error Code 556 | If an MM error is returned which is not defined in the standard FsRtl filter [ERROR_UNEXPECTED_MM_CREATE_ERR (0x22C)] |
| Error Code 557 | If an MM error is returned which is not defined in the standard FsRtl filter [ERROR_UNEXPECTED_MM_MAP_ERROR (0x22D)] |
| Error Code 558 | If an MM error is returned which is not defined in the standard FsRtl filter [ERROR_UNEXPECTED_MM_EXTEND_ERR (0x22E)] |
| Error Code 559 | A malformed function table was encountered during an unwind operation. [ERROR_BAD_FUNCTION_TABLE (0x22F)] |
| Error Code 560 | Indicates that an attempt was made to assign protection to a file system file or directory and one of the SIDs in the security descriptor could not be translated into a GUID that could be stored by the file system. This causes the protection attempt to fail [ERROR_NO_GUID_TRANSLATION (0x230)] |
| Error Code 561 | Indicates that an attempt was made to grow an LDT by setting its size [ERROR_INVALID_LDT_SIZE (0x231)] |
| Error Code 563 | Indicates that the starting value for the LDT information was not an integral multiple of the selector size. [ERROR_INVALID_LDT_OFFSET (0x233)] |
| Error Code 564 | Indicates that the user supplied an invalid descriptor when trying to set up Ldt descriptors. [ERROR_INVALID_LDT_DESCRIPTOR (0x234)] |
| Error Code 565 | Indicates a process has too many threads to perform the requested action. For example [ERROR_TOO_MANY_THREADS (0x235)] |
| Error Code 566 | An attempt was made to operate on a thread within a specific process [ERROR_THREAD_NOT_IN_PROCESS (0x236)] |
| Error Code 567 | Page file quota was exceeded. [ERROR_PAGEFILE_QUOTA_EXCEEDED (0x237)] |
| Error Code 568 | The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role. [ERROR_LOGON_SERVER_CONFLICT (0x238)] |
| Error Code 569 | The SAM database on a Windows Server is significantly out of synchronization with the copy on the Domain Controller. A complete synchronization is required. [ERROR_SYNCHRONIZATION_REQUIRED (0x239)] |
| Error Code 570 | The NtCreateFile API failed. This error should never be returned to an application [ERROR_NET_OPEN_FAILED (0x23A)] |
| Error Code 571 | {Privilege Failed} The I/O permissions for the process could not be changed. [ERROR_IO_PRIVILEGE_FAILED (0x23B)] |
| Error Code 572 | {Application Exit by CTRL+C} The application terminated as a result of a CTRL+C. [ERROR_CONTROL_C_EXIT (0x23C)] |
| Error Code 573 | {Missing System File} The required system file %hs is bad or missing. [ERROR_MISSING_SYSTEMFILE (0x23D)] |
| Error Code 574 | {Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx. [ERROR_UNHANDLED_EXCEPTION (0x23E)] |
| Error Code 575 | {Application Error} The application failed to initialize properly (0x%lx). Click OK to terminate the application. [ERROR_APP_INIT_FAILURE (0x23F)] |
| Error Code 576 | {Unable to Create Paging File} The creation of the paging file %hs failed (%lx). The requested size was %ld. [ERROR_PAGEFILE_CREATE_FAILED (0x240)] |
| Error Code 577 | Windows cannot verify the digital signature for this file. A recent hardware or software change might have installed a file that is signed incorrectly or damaged [ERROR_INVALID_IMAGE_HASH (0x241)] |
| Error Code 578 | {No Paging File Specified} No paging file was specified in the system configuration. [ERROR_NO_PAGEFILE (0x242)] |
| Error Code 579 | {EXCEPTION} A real-mode application issued a floating-point instruction and floating-point hardware is not present. [ERROR_ILLEGAL_FLOAT_CONTEXT (0x243)] |
| Error Code 580 | An event pair synchronization operation was performed using the thread specific client/server event pair object [ERROR_NO_EVENT_PAIR (0x244)] |
| Error Code 581 | A Windows Server has an incorrect configuration. [ERROR_DOMAIN_CTRLR_CONFIG_ERROR (0x245)] |
| Error Code 582 | An illegal character was encountered. For a multi-byte character set this includes a lead byte without a succeeding trail byte. For the Unicode character set this includes the characters 0xFFFF and 0xFFFE. [ERROR_ILLEGAL_CHARACTER (0x246)] |
| Error Code 583 | The Unicode character is not defined in the Unicode character set installed on the system. [ERROR_UNDEFINED_CHARACTER (0x247)] |
| Error Code 584 | The paging file cannot be created on a floppy diskette. [ERROR_FLOPPY_VOLUME (0x248)] |
| Error Code 585 | The system BIOS failed to connect a system interrupt to the device or bus to which the device is connected. [ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT (0x249)] |
| Error Code 586 | This operation is only allowed for the Primary Domain Controller of the domain. [ERROR_BACKUP_CONTROLLER (0x24A)] |
| Error Code 587 | An attempt was made to acquire a mutant such that its maximum count would have been exceeded. [ERROR_MUTANT_LIMIT_EXCEEDED (0x24B)] |
| Error Code 588 | A volume has been accessed for which a file system driver is required that has not yet been loaded. [ERROR_FS_DRIVER_REQUIRED (0x24C)] |
| Error Code 589 | {Registry File Failure} The registry cannot load the hive (file) |
| Error Code 590 | {Unexpected Failure in DebugActiveProcess} An unexpected failure occurred while processing a DebugActiveProcess API request. You may choose OK to terminate the process [ERROR_DEBUG_ATTACH_FAILED (0x24E)] |
| Error Code 591 | {Fatal System Error} The %hs system process terminated unexpectedly with a status of 0x%08x (0x%08x 0x%08x). The system has been shut down. [ERROR_SYSTEM_PROCESS_TERMINATED (0x24F)] |
| Error Code 592 | {Data Not Accepted} The TDI client could not handle the data received during an indication. [ERROR_DATA_NOT_ACCEPTED (0x250)] |
| Error Code 593 | NTVDM encountered a hard error. [ERROR_VDM_HARD_ERROR (0x251)] |
| Error Code 594 | {Cancel Timeout} The driver %hs failed to complete a canceled I/O request in the allotted time. [ERROR_DRIVER_CANCEL_TIMEOUT (0x252)] |
| Error Code 595 | {Reply Message Mismatch} An attempt was made to reply to an LPC message [ERROR_REPLY_MESSAGE_MISMATCH (0x253)] |
| Error Code 596 | {Delayed Write Failed} Windows was unable to save all the data for the file %hs. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. [ERROR_LOST_WRITEBEHIND_DATA (0x254)] |
| Error Code 597 | The parameter(s) passed to the server in the client/server shared memory window were invalid. Too much data may have been put in the shared memory window. [ERROR_CLIENT_SERVER_PARAMETERS_INVALID (0x255)] |
| Error Code 598 | The stream is not a tiny stream. [ERROR_NOT_TINY_STREAM (0x256)] |
| Error Code 599 | The request must be handled by the stack overflow code. [ERROR_STACK_OVERFLOW_READ (0x257)] |
| Error Code 600 | Internal OFS status codes indicating how an allocation operation is handled. Either it is retried after the containing onode is moved or the extent stream is converted to a large stream. [ERROR_CONVERT_TO_LARGE (0x258)] |
| Error Code 601 | The attempt to find the object found an object matching by ID on the volume but it is out of the scope of the handle used for the operation. [ERROR_FOUND_OUT_OF_SCOPE (0x259)] |
| Error Code 602 | The bucket array must be grown. Retry transaction after doing so. [ERROR_ALLOCATE_BUCKET (0x25A)] |
| Error Code 603 | The user/kernel marshalling buffer has overflowed. [ERROR_MARSHALL_OVERFLOW (0x25B)] |
| Error Code 604 | The supplied variant structure contains invalid data. [ERROR_INVALID_VARIANT (0x25C)] |
| Error Code 605 | The specified buffer contains ill-formed data. [ERROR_BAD_COMPRESSION_BUFFER (0x25D)] |
| Error Code 606 | {Audit Failed} An attempt to generate a security audit failed. [ERROR_AUDIT_FAILED (0x25E)] |
| Error Code 607 | The timer resolution was not previously set by the current process. [ERROR_TIMER_RESOLUTION_NOT_SET (0x25F)] |
| Error Code 608 | There is insufficient account information to log you on. [ERROR_INSUFFICIENT_LOGON_INFO (0x260)] |
| Error Code 609 | {Invalid DLL Entrypoint} The dynamic link library %hs is not written correctly. The stack pointer has been left in an inconsistent state. The entrypoint should be declared as WINAPI or STDCALL. Select YES to fail the DLL load. Select NO to continue execution. Selecting NO may cause the application to operate incorrectly. [ERROR_BAD_DLL_ENTRYPOINT (0x261)] |
| Error Code 610 | {Invalid Service Callback Entrypoint} The %hs service is not written correctly. The stack pointer has been left in an inconsistent state. The callback entrypoint should be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue operation. However [ERROR_BAD_SERVICE_ENTRYPOINT (0x262)] |
| Error Code 611 | There is an IP address conflict with another system on the network [ERROR_IP_ADDRESS_CONFLICT1 (0x263)] |
| Error Code 612 | There is an IP address conflict with another system on the network [ERROR_IP_ADDRESS_CONFLICT2 (0x264)] |
| Error Code 613 | {Low On Registry Space} The system has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored. [ERROR_REGISTRY_QUOTA_LIMIT (0x265)] |
| Error Code 614 | A callback return system service cannot be executed when no callback is active. [ERROR_NO_CALLBACK_ACTIVE (0x266)] |
| Error Code 615 | The password provided is too short to meet the policy of your user account. Please choose a longer password. [ERROR_PWD_TOO_SHORT (0x267)] |
| Error Code 616 | The policy of your user account does not allow you to change passwords too frequently. This is done to prevent users from changing back to a familiar [ERROR_PWD_TOO_RECENT (0x268)] |
| Error Code 617 | You have attempted to change your password to one that you have used in the past. The policy of your user account does not allow this. Please select a password that you have not previously used. [ERROR_PWD_HISTORY_CONFLICT (0x269)] |
| Error Code 618 | The specified compression format is unsupported. [ERROR_UNSUPPORTED_COMPRESSION (0x26A)] |
| Error Code 619 | The specified hardware profile configuration is invalid. [ERROR_INVALID_HW_PROFILE (0x26B)] |
| Error Code 620 | The specified Plug and Play registry device path is invalid. [ERROR_INVALID_PLUGPLAY_DEVICE_PATH (0x26C)] |
| Error Code 621 | The specified quota list is internally inconsistent with its descriptor. [ERROR_QUOTA_LIST_INCONSISTENT (0x26D)] |
| Error Code 622 | {Windows Evaluation Notification} The evaluation period for this installation of Windows has expired. This system will shutdown in 1 hour. To restore access to this installation of Windows [ERROR_EVALUATION_EXPIRATION (0x26E)] |
| Error Code 623 | {Illegal System DLL Relocation} The system DLL %hs was relocated in memory. The application will not run properly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor supplying the DLL should be contacted for a new DLL. [ERROR_ILLEGAL_DLL_RELOCATION (0x26F)] |
| Error Code 624 | {DLL Initialization Failed} The application failed to initialize because the window station is shutting down. [ERROR_DLL_INIT_FAILED_LOGOFF (0x270)] |
| Error Code 625 | The validation process needs to continue on to the next step. [ERROR_VALIDATE_CONTINUE (0x271)] |
| Error Code 626 | There are no more matches for the current index enumeration. [ERROR_NO_MORE_MATCHES (0x272)] |
| Error Code 627 | The range could not be added to the range list because of a conflict. [ERROR_RANGE_LIST_CONFLICT (0x273)] |
| Error Code 628 | The server process is running under a SID different than that required by client. [ERROR_SERVER_SID_MISMATCH (0x274)] |
| Error Code 629 | A group marked use for deny only cannot be enabled. [ERROR_CANT_ENABLE_DENY_ONLY (0x275)] |
| Error Code 630 | {EXCEPTION} Multiple floating point faults. [ERROR_FLOAT_MULTIPLE_FAULTS (0x276)] |
| Error Code 631 | {EXCEPTION} Multiple floating point traps. [ERROR_FLOAT_MULTIPLE_TRAPS (0x277)] |
| Error Code 632 | The requested interface is not supported. [ERROR_NOINTERFACE (0x278)] |
| Error Code 633 | {System Standby Failed} The driver %hs does not support standby mode. Updating this driver may allow the system to go to standby mode. [ERROR_DRIVER_FAILED_SLEEP (0x279)] |
| Error Code 634 | The system file %1 has become corrupt and has been replaced. [ERROR_CORRUPT_SYSTEM_FILE (0x27A)] |
| Error Code 635 | {Virtual Memory Minimum Too Low} Your system is low on virtual memory. Windows is increasing the size of your virtual memory paging file. During this process [ERROR_COMMITMENT_MINIMUM (0x27B)] |
| Error Code 636 | A device was removed so enumeration must be restarted. [ERROR_PNP_RESTART_ENUMERATION (0x27C)] |
| Error Code 637 | {Fatal System Error} The system image %s is not properly signed. The file has been replaced with the signed file. The system has been shut down. [ERROR_SYSTEM_IMAGE_BAD_SIGNATURE (0x27D)] |
| Error Code 638 | Device will not start without a reboot. [ERROR_PNP_REBOOT_REQUIRED (0x27E)] |
| Error Code 639 | There is not enough power to complete the requested operation. [ERROR_INSUFFICIENT_POWER (0x27F)] |
| Error Code 640 | ERROR_MULTIPLE_FAULT_VIOLATION [ERROR_MULTIPLE_FAULT_VIOLATION (0x280)] |
| Error Code 641 | The system is in the process of shutting down. [ERROR_SYSTEM_SHUTDOWN (0x281)] |
| Error Code 642 | An attempt to remove a processes DebugPort was made [ERROR_PORT_NOT_SET (0x282)] |
| Error Code 643 | This version of Windows is not compatible with the behavior version of directory forest [ERROR_DS_VERSION_CHECK_FAILURE (0x283)] |
| Error Code 644 | The specified range could not be found in the range list. [ERROR_RANGE_NOT_FOUND (0x284)] |
| Error Code 646 | The driver was not loaded because the system is booting into safe mode. [ERROR_NOT_SAFE_MODE_DRIVER (0x286)] |
| Error Code 647 | The driver was not loaded because it failed it’s initialization call. [ERROR_FAILED_DRIVER_ENTRY (0x287)] |
| Error Code 648 | The “%hs” encountered an error while applying power or reading the device configuration. This may be caused by a failure of your hardware or by a poor connection. [ERROR_DEVICE_ENUMERATION_ERROR (0x288)] |
| Error Code 649 | The create operation failed because the name contained at least one mount point which resolves to a volume to which the specified device object is not attached. [ERROR_MOUNT_POINT_NOT_RESOLVED (0x289)] |
| Error Code 650 | The device object parameter is either not a valid device object or is not attached to the volume specified by the file name. [ERROR_INVALID_DEVICE_OBJECT_PARAMETER (0x28A)] |
| Error Code 651 | A Machine Check Error has occurred. Please check the system eventlog for additional information. [ERROR_MCA_OCCURED (0x28B)] |
| Error Code 652 | There was error [%2] processing the driver database. [ERROR_DRIVER_DATABASE_ERROR (0x28C)] |
| Error Code 653 | System hive size has exceeded its limit. [ERROR_SYSTEM_HIVE_TOO_LARGE (0x28D)] |
| Error Code 654 | The driver could not be loaded because a previous version of the driver is still in memory. [ERROR_DRIVER_FAILED_PRIOR_UNLOAD (0x28E)] |
| Error Code 655 | {Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation. [ERROR_VOLSNAP_PREPARE_HIBERNATE (0x28F)] |
| Error Code 656 | The system has failed to hibernate (The error code is %hs). Hibernation will be disabled until the system is restarted. [ERROR_HIBERNATION_FAILURE (0x290)] |
| Error Code 665 | The requested operation could not be completed due to a file system limitation [ERROR_FILE_SYSTEM_LIMITATION (0x299)] |
| Error Code 668 | An assertion failure has occurred. [ERROR_ASSERTION_FAILURE (0x29C)] |
| Error Code 669 | An error occurred in the ACPI subsystem. [ERROR_ACPI_ERROR (0x29D)] |
| Error Code 670 | WOW Assertion Error. [ERROR_WOW_ASSERTION (0x29E)] |
| Error Code 671 | A device is missing in the system BIOS MPS table. This device will not be used. Please contact your system vendor for system BIOS update. [ERROR_PNP_BAD_MPS_TABLE (0x29F)] |
| Error Code 672 | A translator failed to translate resources. [ERROR_PNP_TRANSLATION_FAILED (0x2A0)] |
| Error Code 673 | A IRQ translator failed to translate resources. [ERROR_PNP_IRQ_TRANSLATION_FAILED (0x2A1)] |
| Error Code 674 | Driver %2 returned invalid ID for a child device (%3). [ERROR_PNP_INVALID_ID (0x2A2)] |
| Error Code 675 | {Kernel Debugger Awakened} the system debugger was awakened by an interrupt. [ERROR_WAKE_SYSTEM_DEBUGGER (0x2A3)] |
